WILSON PIN SET FOR 1911 STNLS

Description

When a 1911 is rebuilt, refinished, or simply worn from years of use, the small-diameter pins that hold the action together are easy to overlook — and equally easy to lose on a workbench. Wilson Combat’s stainless complete pin set covers every pin needed to put a 1911-pattern pistol back together from the frame up: the link pin, sear pin, ejector pin, hammer pin, hammer strut pin, mainspring cap pin, and mainspring housing pin retainer are all included in one package.

The stainless material matters here beyond appearance. These pins operate in an environment of spring tension, impact, and intermittent exposure to solvents, moisture, and bore cleaner. Stainless holds up to that cycle better than uncoated carbon steel and won’t leave rust staining on adjacent frame surfaces if a gun sits in a safe without maintenance for a stretch. Wilson Combat specifies high-grade steel with heat treatment to bring each pin to the correct hardness — soft enough to drift without galling the frame, hard enough to resist deformation under normal operating stress.

This set is useful for gunsmiths doing a full rebuild, for owners doing a complete detail strip after years of service, and for anyone assembling a 1911 from a parts kit who wants to source pins from a single, known quantity rather than pulling them from a parts bin of uncertain origin. Because it covers the full complement of frame pins rather than individual replacements, it removes the guesswork about which pins are still serviceable and which have taken enough wear to warrant replacement.